Product Min Specifiction D M Red moulding sand 22kg Sand Conditioner No 2 SC#2 is a powder additive for green moulding sands which improves the mouldability & toughness while allowing the sand to remain flowable. It will also reduce the amount of drying out experienced with hot sand or in hot conditions. A small addition of 0.5% is sufficient for most sand. If added to facing sand, then add the same level every time. 25kg Bentomix Oil bonded Sand - Facing sand for good finish (suitable for ferrous & non ferrous) 25kg Bentonite Clay - to reconstitute old green sand A handful mixed as required to maintain bonding & moulding properties - keep dry 2kg Plumbago Powder 1kg Parting Powder 5kg Linen powder bag Sold per item Camel hair brushes size 1” - for finishing mould faces Sold per item Camel hair mop no 6 - ½” dia Sold per item Wet or swab brushes Sold per item Sieve 14” x 1/8” mesh Sold per item Sieve 14” x ¼” mesh Sold per item Aluminium sprue cutter 6” Sold per item Round wood sand rammer - flat & wedge end Sold per item No 2 moulders sand shovel Sold per item Winterbond Sodium Silicate NO 30 For mould & core making - C02 hardening Mix ratio - approx 3% Sold per KG