JW WINTERCRYL HEAT CURE

20 minute cure, cadmium free denture base material. Conforms to stringent requirements of both BS and ISO standards.

5 litres of liquid - WCL445
21/2 litres of liquid - WCL450

JW WINTERCRYL RAPID REPAIR

Wintercryl cold cure material to match the above heat cure, available in identical shades.

21/2 litres of liquid - RRL485

JW J-CRYL HEAT CURE

Cadmium free denture base material. Conforms to stringent requirements of both BS and ISO standards. Only available in Opaque Veined.

Lab pack (12kg + 5 litres) - JC487

JW J-CRYL RAPID REPAIR

J-Cryl Rapid repair material in opaque veined to match perfectly with J-Cryl Heat cure (above).

SHERADON HIGH STRENGTH HC

Due to it’s exceptional flow characteristics this high strength acrylic can be processed using the press or injection technique. SHERADON distinguishes itself by having minimal shrinkage.

1kg Pink powder - 501010
1kg Pink Veined powder - 501020
1kg Trans’ Veined powder - 501030

500ml SHERADON Monomer - 508010

SHERAPRESS COLD CURE

High quality cold cure acrylic, for the production of partial, repair and total dentures. Apart from the dough technique it is also ideally suited to the casting technique. The malleable phase lasts for approximately 3 minutes. Available in pink, pink veined, transparent pink veined and clear.

1kg Pink powder - 502010
1kg Pink Veined powder - 502040
1kg Pink Trans’ Veined powder - 502050
1kg Clear powder - 502030

500ml SHERAPRESS Monomer - 508020

SHERAPRESS-FLEX

Cold cure acrylic based on methyl methacrylate.
For the completion of chrome and full dentures and for repairs. Apart from the dough technique SHERAPRESS-FLEX is also ideally suited for the casting technique. It’s malleable phase is in the order of twenty minutes.

1kg Pink powder - 502060

500ml SHERAPRESS-FLEX MONOMER - 508030

SHERAFINISH

Apply SHERAFINISH to any acrylic denture or orthodontic appliance and you will instantly see an improvement in the appearance. However SHERAFINISH not only gives a great shine to the appliance it also removes any traces of residual monomer and leaves a pleasant, fresh taste.

75ml spray bottle - 990101

DENTURE LINING MATERIALS

VOCO UFI GEL SC SOFT

PERMANENT SOFT RELINE MATERIAL
Ufi Gel SC is an A-silicone which is dispensed by means of a gun fitting 1:1 cartridge. This means low wastage and exceptional mixing. Relines can be carried out directly (chair side) or in the laboratory in minutes. We have found this product to be superb for obturators.

Intro’ kit (shown), excl gun - 2041
Refill kit (includes tips) - 2040

VOCO UFI GEL HARD

HARD RELINE MATERIAL
Ufi gel hard is the hard version of the above product, again available in a convenient gun and cartridge system. Ufi gel hard is methyl - methacrylate free and can produce chair side relines in only 10 minutes. Also ideal for quick denture repairs.

Intro’ kit (shown), incl. gun - 2218
Refill Kit (shown) - 2216

MOLLOPLAST ‘B’ & Primo Adhesive

A ready to use B-silicone soft lining material that is not only soft but highly elastic and remains permanently soft. Heat curing.
Available in two sizes:

45 gram tub - MP505
170 gram tub - MP510
Primo Adhesive 15ml - MP511

MYERSON EVERSOFT

A very popular material which chemically bonds to acrylics without having to use a bonding agent. It can be cured in steaming hot water in 15 mins or 45 mins in a flask. Included in the kits is a non absorbent sealer, which dries to a high gloss glaze in minutes.

30 gram kit - MY515
120 gram kit - MY520
500 gram powder only - MY525
120 gram powder only - MY530
500ml liquid only - MY535